just got my edelbrock victor jr. 4.6 intake

98COBRA281 · 08-19-2009, 07:52 PM

well i just got it today, i havent seen many people with these so i figured id post some pics

looks like im going to be doing some porting and port matching........

SilverBullet · 08-19-2009, 10:49 PM

so....this works on EFI cars or is it for carb only?

98COBRA281 · 08-19-2009, 11:01 PM

no it works on efi cars, there 2 versions a carb one and efi, you can see the holes of the injectors, and there a plate the lets a stock upper plenuim bolt up.

SilverBullet · 08-19-2009, 11:11 PM

Thats badass...took them long enough!

I am interested in seeing the gains.

boss96 · 08-20-2009, 11:39 AM

Pretty sure it is last months HotRod Mag that has a dyno test on a 2v that includes that manifold. Makes good power

hotmustang95 · 08-20-2009, 01:36 PM

Thats nice. I dont know much when it comes to the 4.6 stuff but i know thats not something you see everyday. Will you be dynoing the car for before and after #s?

98COBRA281 · 08-20-2009, 05:23 PM

the car now makes 310rwhp, and 310rwtq, with poerted heads, cams, and longtubes, with the stock pi intake and MAF, and a small ebay cai, ill redyno with the edelbrock intake, jlt ram air intake (4" tube) and 90mm lighting MAF, hoping to make 330rwhp+

SteedaMattL · 08-20-2009, 05:39 PM

NIce looking manifold. Interested to see the gains. You might want to dyno it once with just the manifold changed, then change the MAF and CAI, that way you'll know exactly what gains you got from the manifold, and the other 2 are pretty quick and easy to swap in.

CrazyHorse · 08-21-2009, 03:52 PM

I have a question

What else did you need to buy for this intake besides aftermarket fuel rails? i know that it says you need a 4bbl style intake but our stock intakes are that shape to begin with. I want to possibly spray in the future and a non plastic intake is what i need so any info would be great! You said you are already at 310, so what kind of gains are you expecting?

- CrazyHorse

bigd3077 · 08-21-2009, 04:04 PM

Cool!! Keep us posted on your gains.

96GT281 · 08-21-2009, 04:45 PM

Quote:

Originally Posted by CrazyHorse

I have a question

What else did you need to buy for this intake besides aftermarket fuel rails? i know that it says you need a 4bbl style intake but our stock intakes are that shape to begin with. I want to possibly spray in the future and a non plastic intake is what i need so any info would be great! You said you are already at 310, so what kind of gains are you expecting?

- CrazyHorse

about another 20+ rwhp

boss96 · 08-21-2009, 05:00 PM

I don't think a carb will bolt on the efi version, you have to buy one of their intake elbows

96GT281 · 08-21-2009, 05:29 PM

yes a carb will bolt on to the efi one, witch is stupid MMR makes an adapter plate for $65, but its just a flat paice of aluminum, so i going to make it myself, and that is all you need to convert. fuel rails, and adapter plate to run stock/or stock style upper plenium.

OPPS THIS IS 98COBRA281 I POSTED IN THE WRONG NAME!!!

98COBRA281 · 08-21-2009, 05:32 PM

i hoping to put down 330+ all motor, but i would love to be in the 340-350rwhp N/A range......

CrazyHorse · 08-21-2009, 07:42 PM

there is a member on mustang forums who has the victor jr and he made his own plate too, that seems to be the way to go if you arent using the elbow.

08-19-2009, 07:52 PM	#1
98COBRA281 LS1 KILLER!! Join Date: Aug 2008 Location: Port St. Lucie Posts: 499 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 5 Offline	just got my edelbrock victor jr. 4.6 intake well i just got it today, i havent seen many people with these so i figured id post some pics looks like im going to be doing some porting and port matching........ ______________________________________________________ N/A NPI 2V. 330RWHP -306RWTQ 11.93 at 115

08-19-2009, 10:49 PM	#2
SilverBullet Senior Member Join Date: May 2006 Location: Land of Green Posts: 7,393 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 0 Offline	Re: just got my edelbrock victor jr. 4.6 intake so....this works on EFI cars or is it for carb only?

08-19-2009, 11:01 PM	#3
98COBRA281 LS1 KILLER!! Join Date: Aug 2008 Location: Port St. Lucie Posts: 499 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 5 Offline	Re: just got my edelbrock victor jr. 4.6 intake no it works on efi cars, there 2 versions a carb one and efi, you can see the holes of the injectors, and there a plate the lets a stock upper plenuim bolt up. ______________________________________________________ N/A NPI 2V. 330RWHP -306RWTQ 11.93 at 115

08-19-2009, 11:11 PM	#4
SilverBullet Senior Member Join Date: May 2006 Location: Land of Green Posts: 7,393 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 0 Offline	Re: just got my edelbrock victor jr. 4.6 intake Thats badass...took them long enough! I am interested in seeing the gains.

08-20-2009, 11:39 AM	#5
boss96 Member Join Date: Nov 2004 Location: , , . Posts: 499 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 10 Offline	Re: just got my edelbrock victor jr. 4.6 intake Pretty sure it is last months HotRod Mag that has a dyno test on a 2v that includes that manifold. Makes good power

	#ADS
South Florida Stangs Wild and free since 2003! Join Date: Jan 2003 Location: SouthFloridaStangs.net Age: 23 Posts: 6,969

08-20-2009, 01:36 PM	#6
hotmustang95 95 SWORD Join Date: May 2006 Location: Boynton Beach Posts: 2,243 Thanks: 0 Thanked 3 Times in 2 Posts Rep Power: 15 Offline	Re: just got my edelbrock victor jr. 4.6 intake Thats nice. I dont know much when it comes to the 4.6 stuff but i know thats not something you see everyday. Will you be dynoing the car for before and after #s? ______________________________________________________ Victor (goofyfeet) Oliver PBMC Board Member #95

08-20-2009, 05:23 PM	#7
98COBRA281 LS1 KILLER!! Join Date: Aug 2008 Location: Port St. Lucie Posts: 499 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 5 Offline	Re: just got my edelbrock victor jr. 4.6 intake the car now makes 310rwhp, and 310rwtq, with poerted heads, cams, and longtubes, with the stock pi intake and MAF, and a small ebay cai, ill redyno with the edelbrock intake, jlt ram air intake (4" tube) and 90mm lighting MAF, hoping to make 330rwhp+ ______________________________________________________ N/A NPI 2V. 330RWHP -306RWTQ 11.93 at 115

08-20-2009, 05:39 PM	#8
SteedaMattL member Join Date: May 2009 Posts: 1,287 Thanks: 0 Thanked 3 Times in 3 Posts Rep Power: 10 Offline	Re: just got my edelbrock victor jr. 4.6 intake NIce looking manifold. Interested to see the gains. You might want to dyno it once with just the manifold changed, then change the MAF and CAI, that way you'll know exactly what gains you got from the manifold, and the other 2 are pretty quick and easy to swap in.

08-21-2009, 03:52 PM	#9
CrazyHorse Crazy Since 1985 Join Date: Mar 2006 Location: Crazyville Posts: 921 Thanks: 1 Thanked 0 Times in 0 Posts Images: 1 Rep Power: 20 Offline	Re: just got my edelbrock victor jr. 4.6 intake I have a question What else did you need to buy for this intake besides aftermarket fuel rails? i know that it says you need a 4bbl style intake but our stock intakes are that shape to begin with. I want to possibly spray in the future and a non plastic intake is what i need so any info would be great! You said you are already at 310, so what kind of gains are you expecting? - CrazyHorse ______________________________________________________ GIFSoup

08-21-2009, 04:04 PM	#10
bigd3077 Bleach FTW!! Join Date: Jan 2008 Location: coconut creek Posts: 1,881 Thanks: 1 Thanked 3 Times in 2 Posts Rep Power: 30 Offline	Re: just got my edelbrock victor jr. 4.6 intake Cool!! Keep us posted on your gains. ______________________________________________________ In aureola, we trust.....

08-21-2009, 05:00 PM	#12
boss96 Member Join Date: Nov 2004 Location: , , . Posts: 499 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 10 Offline	Re: just got my edelbrock victor jr. 4.6 intake I don't think a carb will bolt on the efi version, you have to buy one of their intake elbows

08-21-2009, 05:29 PM	#13
96GT281 [><] Join Date: Jul 2008 Location: Stuart Posts: 299 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 5 Offline	Re: just got my edelbrock victor jr. 4.6 intake yes a carb will bolt on to the efi one, witch is stupid MMR makes an adapter plate for $65, but its just a flat paice of aluminum, so i going to make it myself, and that is all you need to convert. fuel rails, and adapter plate to run stock/or stock style upper plenium. OPPS THIS IS 98COBRA281 I POSTED IN THE WRONG NAME!!! ______________________________________________________ 1996 GT 5 SPD K&N CAI - PI INTAKE - P&P T/B - 3.73's - STEEDA T/A 15* - MAC O/R H PIPE & CATBACK - POWERHEADS STAGE 1 HOT STREET CAMS

08-21-2009, 05:32 PM	#14
98COBRA281 LS1 KILLER!! Join Date: Aug 2008 Location: Port St. Lucie Posts: 499 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 5 Offline	Re: just got my edelbrock victor jr. 4.6 intake i hoping to put down 330+ all motor, but i would love to be in the 340-350rwhp N/A range...... ______________________________________________________ N/A NPI 2V. 330RWHP -306RWTQ 11.93 at 115

08-21-2009, 07:42 PM	#15
CrazyHorse Crazy Since 1985 Join Date: Mar 2006 Location: Crazyville Posts: 921 Thanks: 1 Thanked 0 Times in 0 Posts Images: 1 Rep Power: 20 Offline	Re: just got my edelbrock victor jr. 4.6 intake there is a member on mustang forums who has the victor jr and he made his own plate too, that seems to be the way to go if you arent using the elbow. ______________________________________________________ GIFSoup

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Edelbrock Super Victor 8.2 intake manifold	kleistang	Classified Ads	0	05-22-2010 01:22 AM
WTB: Super Victor or Victor JR Intake ASAp!!!	I8URRICE	The Lounge	0	02-17-2009 08:18 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode